|
Product Details:
Payment & Shipping Terms:
|
Model: | Oil Heating Two Roll Mill 120ml 4inch | Voltage: | 380V 60Hz, 3 Phase |
---|---|---|---|
Capacity: | 0.5-1kgs / 2-3kgs / 5-7 Kgs | Warm-up Time: | Room Temperature ~ 300 ℃ About 20C |
Cooling Method: | Water / Air Cooling | Temperature Control: | P.I.D Controlled |
Roller Hardness: | HRC 50 ~ 60 | Power Source: | AC380V, 15A |
Power: | About 2800W | ||
Highlight: | Two Roll Mill 120ml,Oil Heating Two Roll Mill 4inch,4inch Lab Two Roll Mill |
Oil Heating Two Roll Mill 120ml 4inch
Introduction:
Oil Heating Two Roll Mill is suitable for polymers such as rubber and plastic industry mixing process PVC, masterbatch and other chemical raw materials. As the raw material and mixed with the agent, and to achieve the desired color and quality.This machine uses oil for heating, roller surface temperature uniformity, never delamination, sample thickness adjustable and attached machine safety devices, lightweight and easy to use.
Application:
Plastic open two roll mixing mill. It is widely used in rubbers and plastics industry for polymer mixing, such as PVC, color master batch. It consists of roll, bearing, gap adjusting device, electric control system, safety device, etc.
Technology Parameters:
Model | Rubber Test Machine Open Mixing Mill |
Mixed capacity | 0.5-1kgs / 2-3kgs / 5-7 kgs |
Temperature | room temperature ~ 300 ℃ |
Temperature control |
LED display, buttons to set the input and display output value |
Temperature control | P.I.D controlled |
Heater | cylindrical mold is heated |
Warm-up time | room temperature ~ 150 ℃ about 20min |
Temperature accuracy | ± 3 ℃ |
Roller dimensions | diameter 3.9 "× L13.7" |
Drum revolutions ratio | Standard revolutions ratio 1:1.25 |
Roller hardness | HRC 50 ~ 60 |
Power | about 2800W |
Protection device is attached state of emergency |
Security |
Volume | 960*550*1150 (W* D* H) mm |
Power source | AC380V, 15A |
Weight | about 380kg |
Features :
1. The rubber two rolls mixing mill machine roll is made of chilled cast iron ,
including hollow roll and drilled roll in structure .The inner cavity of hollow roll is machined .The hollow roll surface is smooth and grooved .The grooved roll includes full grooved roll and half grooved roll etc
2. The rubber two rolls mixing mill machine roll is supported with roller bearing ,
so the energy is saved ,and the noise is reduced and is durable .
3. Rubber two rolls mixing mill machine Lubricating mode includes grease and oil lubrication .
4. Rubber two rolls mixing mill machine Roll nip adjustment includs manual adjustment ,
power adjustment and hydraulic adjustment . hydraulic adjustment can be automatically controlled ,having better safety protection preformance .
5. Rubber two rolls mixing mill machine can be equipped with pressure sensor system
to directly display the working pressure to control the feed .In case of over load ,it can automatically stop at once ,and store and print the peak value .
6. User can select the stock blender according to the processing requirements
Intelligent control panel and PLC control system:
1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code.
2. The control system can be set up to 20 mixing steps, save 20 recipe spaces.
3. The control system is capable of remote import of the process recipe and data monitoring, communicating with MES via Ethernet communication interface.
4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided.
Contact Person: Ms. Fiona Zhong
Tel: +86 135 3248 7540
Fax: 86-0769-3365-7986