Product Details:
Payment & Shipping Terms:
|
Product Name: | Melt Flow Index Tester Touch Screen Volumetric Melt Flow Index Meter | Key Words: | Melt Flow Index |
---|---|---|---|
Model: | ZL-3014B | Temperature Range: | 0 ℃ -450 ℃ |
Temperature Fluctuation: | ±0.2℃ | Displacement Accuracy: | 0.001mm |
Volume Timing: | 0.001S | Barrel Diameter: | Φ2.095±0.005mm |
Length Of Outlet: | 8.000±0.025mm | Diameter Of Charging Barrel: | Φ9.550±0.025mm |
Weight Accuracy: | ±0.5% | Power Supply Voltage: | AC220V±10% 50HZ |
Highlight: | Volumetric Melt Flow Index Tester,Touch Screen Melt Flow Index Tester,Melt Flow Index Tester |
Melt Flow Index Tester Touch Screen Volumetric Melt Flow Index Meter
Download Brief:
ZL-3014B Automatic Melt Flow Rate Meter.pdf
Rubber Testing Machine:
●Product Introduction:
It is used to measure the MFR value of various plastics and resins passing through a certain temperature and load in a viscous flow state, passing through a standard die melt flow rate every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, fluorine, etc. Plastic, nylon and other engineering plastics, also suitable for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin, etc., with low melting temperature Plastic testing is widely used in plastic production, plastic products, petrochemical and other industries, as well as related colleges, scientific research units and commodity inspection departments.
●Implementation Standards:
ISO 1133:1997 "Determination of Thermoplastic Melt Mass Flow Rate MFR and Melt Volume Flow Rate MVR"
ASTM D1238 "Standard Test Method for Determination of Melt Flow Rate of Thermoplastics by Extrusion Plastometer"
●Test Method:
Mass method, Volume method (MFR MVR)
●Display Mode:
7-inch touch screen controller
●Product Features:
Chinese and English color LCD display
ØManual and automatic cutting
Dual temperature control system, more precise temperature control accuracy, higher heating efficiency
ØDual-inlet sensors, the upper and lower temperature gradients are more accurate, can be used independently, and improve the service life
ØThe barrel is made of imported Hastelloy alloy nitriding treatment, the die is made of carbon tungsten steel, and the materials are solid
ØThe insulation barrel is made of all sus304 stainless steel, which will not rust for a long time at high temperature
ØAutomatically calculate the results and print out
●Main Technical Parameters:
Temperature Range | 0 ℃ -450 ℃ |
Temperature Fluctuation | ±0.2℃ |
Temperature Uniformity | ±1℃ |
Temperature Display Resolution | 0.1℃ |
Time Display Resolution | 0.1S |
Displacement Accuracy | 0.001mm |
Volume Timing | 0.001S |
Mass Method Test Range | 0.1-150g/10min |
Volume Method Test Result Range | 50-5000cm³/10min |
Barrel Diameter | Φ2.095±0.005mm |
Length of Outlet | 8.000±0.025mm |
Diameter of Charging Barrel | Φ9.550±0.025mm |
Weight Accuracy | ±0.5% |
Output Mode | Miniature automatic printout |
Cutting Method | Manual and automatic cutting |
Test Load | A full set of eight-level weights |
Power Supply Voltage | AC220V±10% 50HZ |
Contact Person: Ms. Fiona Zhong
Tel: +86 135 3248 7540
Fax: 86-0769-3365-7986