Product Details:
Payment & Shipping Terms:
|
Product Name: | Melt Flow Index Tester Mass Volumetric Melt Flow Rate Meter | Model: | ZL-3014A |
---|---|---|---|
Temperature Range: | 0℃-450℃ | Temperature Fluctuation: | ±0.2℃ |
Temperature Uniformity: | ±1℃ | Barrel Diameter: | Φ2.095±0.005mm |
Length Of Outlet: | 8.000±0.025mm | Diameter Of Charging Barrel: | Φ9.550±0.025mm |
Power Supply Voltage: | Power Supply Voltage AC220V±10% 50HZ | ||
Highlight: | Volumetric Melt Flow Rate Meter,Mass Volumetric Melt Flow Rate Meter,Melt Flow Index Tester |
Melt Flow Index Tester Mass Volumetric Melt Flow Rate Meter
Download Brief:
ZL-3014B Automatic Melt Flow Rate Meter.pdf
Rubber Testing Machine:
●Product Introduction:
It is used to measure the MFR value of various plastics and resins passing through a certain temperature and load in a viscous flow state, passing through a standard die melt flow rate every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, fluorine, etc. Plastic, nylon and other engineering plastics, also suitable for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin, etc., with low melting temperature Plastic testing is widely used in plastic production, plastic products, petrochemical and other industries, as well as related colleges, scientific research units and commodity inspection departments.
●Implementation Standards:
ISO 1133:1997 "Determination of Thermoplastic Melt Mass Flow Rate MFR and Melt Volume Flow Rate MVR"
ASTM D1238 "Standard Test Method for Determination of Melt Flow Rate of Thermoplastics by Extrusion Plastometer"
●Test Method:
Quality Method
●Display Mode:
Chinese and English color touch screen display
●Product Features:
Chinese and English color LCD display
ØManual and automatic cutting
Dual temperature control system, more precise temperature control accuracy, higher heating efficiency
ØDual-inlet sensors, the upper and lower temperature gradients are more accurate, can be used independently, and improve the service life
ØThe barrel is made of imported Hastelloy alloy nitriding treatment, the die is made of carbon tungsten steel, and the materials are solid
ØThe insulation barrel is made of all sus304 stainless steel, which will not rust for a long time at high temperature
ØAutomatically calculate the results and print out
●The Main Technical Parameters:
Temperature Range | 0℃-450℃ |
Temperature Fluctuation | ±0.2℃ |
Temperature Uniformity | ±1℃ |
Temperature Display Resolution | 0.1℃ |
Time Display Resolution | 0.1S |
Displacement Accuracy | 0.01mm |
Barrel Diameter | Φ2.095±0.005mm |
Length of Outlet | 8.000±0.025mm |
Diameter of Charging Barrel | Φ9.550±0.025mm |
Weight Accuracy | ±0.5% |
Output Mode | Miniature automatic printout |
Cutting Method | Manual and automatic cutting |
Test Load | A total of 8 levels, 8 sets of weights |
Power Supply Voltage | AC220V±10% 50HZ |
Contact Person: Ms. Fiona Zhong
Tel: +86 135 3248 7540
Fax: 86-0769-3365-7986