|
Product Details:
Payment & Shipping Terms:
|
Name: | ISO 1133 Touch Screen Mass Method Melt Index Meter | Temperature Range: | 0℃-450℃ |
---|---|---|---|
Temperature Fluctuation: | ±0.2℃ | Temperature Uniformity: | ±1℃ |
Displacement Accuracy: | 0.001mm | Volume Timing: | 0.001S |
Test Result Range: | 0.1-150g/10min | Barrel Diameter: | Φ2.095±0.005mm |
Modek: | ZL-3013B | ||
Highlight: | Mass Method Melt Index Meter,Touch Screen Melt Index Meter |
●Product Description:
It is used to measure the MFR value of various plastics and resins passing through a certain temperature and load in a viscous flow state, passing through a standard die melt flow rate every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, fluorine, etc. Plastic, nylon and other engineering plastics, also suitable for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin, etc., with low melting temperature Plastic testing is widely used in plastic production, plastic products, petrochemical and other industries, as well as related colleges, scientific research units and commodity inspection departments.
●Implementation Standards:
nISO 1133:1997 "Determination of Thermoplastic Melt Mass Flow Rate MFR and Melt Volume Flow Rate MVR"
nASTM D1238 "Standard Test Method for Determination of Melt Flow Rate of Thermoplastics by Extrusion Plastometer"
●Test Method:
Quality Method (MFR)
●Display Mode:
7-inch touch screen controller
●Product Features:
◆Chinese and English color LCD display
Ø◆Manual and automatic cutting
◆Dual temperature control system, more precise temperature control accuracy, higher heating efficiency
Ø◆Dual-inlet sensors, the upper and lower temperature gradients are more accurate, can be used independently, and improve the service life
Ø◆The barrel is made of imported Hastelloy alloy nitriding treatment, the die is made of carbon tungsten steel, and the materials are solid
Ø◆The insulation barrel is made of all sus304 stainless steel, which will not rust for a long time at high temperature
Ø◆Automatically calculate the results and print out
●Main Technical Parameters:
Ø
Temperature Range | 0℃-450℃ |
Temperature Fluctuation | ±0.2℃ |
Temperature Uniformity | ±1℃ |
Temperature Display Resolution | 0.1℃ |
Time Display Resolution | 0.1S |
Displacement Accuracy | 0.001mm |
Volume Timing | 0.001S |
Test Result Range | 0.1-150g/10min |
Barrel Diameter | Φ2.095±0.005mm |
Length of Outlet | 8.000±0.025mm |
Diameter of Charging Barrel | Φ9.550±0.025mm |
Weight Accuracy | ±0.5% |
Output Mode | Miniature automatic printout |
Cutting Method | Manual and automatic cutting |
Test Load | A full set of eight-level weights |
Power Supply Voltage | AC220V±10% 50HZ |
Contact Person: Ms. Fiona Zhong
Tel: +86 135 3248 7540
Fax: 86-0769-3365-7986