Notebook Shaft Automatic Torque Testing Machine

Notebook Shaft Automatic Torque Testing Machine

Introduction:

The computer automatic shaft torsion endurance testing machine can test the torsion decline of the rotating shaft after the notebook cover is opened and closed for many times. It can measure the torque value of the rotating shaft every time and record the curve change and draw the torque decay life curve diagram. It is inconvenient to measure the torque only after the shaft is disassembled. Using the Windows window screen setting, the operation is simple and convenient, and all data can be stored (test conditions, torque-angle graphs, life graphs, inspection reports, etc.).

Technical Parameters:

Features:

1. Graphics can be printed and stored (torque-angle graph, torque decay graph, inspection report).

2. Test data storage and hard disk (each data can be stored, unlimited times).

3. The content of the header of the inspection report can be modified at any time (both in Chinese and English).

4. The inspection report can be transferred to Excel for editing.

5. Record each torque-angle graph.

6. Simultaneously display the torque-angle curve and the torque decay curve.

7. The test position of Notebook can be adjusted by itself.

8. You can choose unilateral force or bilateral force

9. The test conditions are all set by the computer screen (including opening angle, speed, times, pause time, etc.).

Operating steps:

1. Clip it with the test sample

1.1 Secure the sample to the left fixture

1.2 Adjust the required position of the right fixture according to the sample specifications

1.3 Adjust the fixture to the appropriate test position through the left side knob (e. g. adjust the bending position to the turntable center, etc.)

2. Turn on the power switch, enter the operation interface, and set relevant parameters (angle, speed, etc., etc.)

3. After the arrival, the machine stops automatically

4. Conduct the next test and repeat the above steps

Advantage Service:

1. We have R&D, designing department which can not only provide technological machines but also can satisfy special customized needs of our clients.

2. Over 50 years’ manufacturing experience, advanced machine and sophisticated handcraft.

3. There are TWO laboratories in our factory: Environmental laboratory and Physical laboratory.

4. Our factory have adequate stock monthly, which can meet customers’ urgent needs.

5. Annual sales over 1,000,000USD; 30,000㎡manufacturing base, equipped with 120 technicians, we are capable to take large budget project.

Technical Support:

1. SUS Stainless plate is cut by advanced leaser machine which can ensure accuracy; All machine appearance is anti-rust electrostatic painting;

2. Imported electronic components: ABB/Siemens/Panasonic/Saginomiya/Danfoss/Emkarate/Omron/Philips and imported compressor:BOEK/TECUMSEH, which can keep the machine’s service life over 10 years.

After-sale Service:

1. We promise 14 month’s warranty and lifetime maintenance.

2. During the warranty time, any components broken is FREE to change, and we offer FREE picture, video instruction after your purchasing of our machine.

3. All machine is sent with a packing list, operation instruction(paper file), warranty certificate(with valid date) and other accessories.

Package:

We pack machine with plastic wrap (water proof), then pack with poly wood board,

cystosepiment inside the board and machine for fixture.