Payment & Shipping Terms:
|Product Name:||GB/T10586-2006 Linear Temperature Change Test Chamber For Rubber , Electronics||Inner Box Material:||SUS #304 Stainless Steel Plate (South Korea Pu Box)|
|Outer Box Material:||Iron Plate Paint||Temperature Rising Rate:||Heating Rate:3℃/min Linear No-load|
|Rate Of Cooling Rate Rate Of Cooling Rate:||1℃/min Linear No-load||Temperature Limit:||Maximum Temperature +150℃ Minimum Temperature -45℃|
Rubber Temperature Change Test Chamber,
Electronics Temperature Testing Equipment
GB/T10586-2006 Linear Temperature Change Test Chamber For Rubber , Electronics
This test chamber provides a simulated environment of high temperature, low temperature, high humidity, and low humidity to detect the materials and strong attenuation of rubber, plastic, and electronic products before and after the test. The machine can also simulate the container environment to detect the discoloration and shrinkage of rubber and plastic under high temperature and high humidity. Test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. It is suitable for the quality inspection of industrial units in electronics, electrical appliances, batteries, universities, research institutes, inspection and quarantine bureaus, paper products, food, vehicles, auto parts, metals, chemicals, building materials and other industries.
Way To Control:
The balanced temperature control system (BTHC) controls the SSR in the P.I.D. mode so that the heating amount of the system is equal to the amount of heat loss, so it can be used stably for a long time.
Equipment standard: designed and manufactured according to national standards GB/T10586-2006 and GB/T10592-1989. *The verification standard is based on GB/T5170.2-2008, 5170.5-2008
Tips: The temperature uniformity of GB/T5170.5-2008. refers to the no-load situation; the humidity uniformity also refers to the no-load conditions!
|Inner box size W×H×D||1000mm*1000mm*1000mm (can be customized)|
|Outer box size W×H×D||1300mm*2300mm*2100mm or negotiate according to the equipment placement site|
|Control stability||Temperature ±0.5℃ Humidity ±2.5%R.H After the temperature reaches the set point, there is no overshoot and jitter of temperature and humidity, and the fluctuation reaches <0.5℃|
|Distribution uniformity||Temperature: ≤±1.5℃ Humidity: ≤±2.5%R.H|
|Temperature rising rate||
Heating rate:3℃/min Linear no-load
|Rate of cooling rate Rate of cooling rate||
1℃/min Linear no-load
|Temperature limit||maximum temperature +150℃ minimum temperature -45℃|
|Power source||AC3￠ 5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤±10%)|
|Total power||about 45KW (specifically subject to actual)|
|Noise||≤80 dB measured at 1 meter directly in front of the device|
|Overall structure||The box body is fully welded in the factory, the structure is firm, the installation is fast, the construction period is short, and the equipment can be moved easily in the later stage. There is no need to remove any refrigeration unit or electronic control unit.|
|Inner box material||SUS #304 stainless steel plate (South Korea Pu box)|
|Outer box material||iron plate paint|
|Storage rack||stainless steel SUS304# adjustable spacing storage rail 2 groups, grid storage rack 2 sheet. Each layer bears 20kg. The sample rack can be adjusted up and down as needed.|
|Thermal insulation material||100mm rigid polyurethane foam, fire-resistant and fire-proof, in line with environmental requirements. The interlayer between the stainless steel of the inner chamber and the outer shell is filled with polyurethane, which can simultaneously insulate and strengthen the strength of the inner and outer chambers.|
|Sealing||The door of the test box is sealed with silicon rubber strip, which is resistant to high and low temperature, anti-aging, and has good sealing performance|
|Observation window||There is a large-scale vacuum observation glass with 3 layers of heat and sweat prevention attached to the door. During any test, there is no frost or condensation on the surface.|
|Lighting device||There is a lighting lamp on the window.|
|Test hole||There is one Φ160mm hole on the left and right sides of the body, and two soft plugs. It can be used for external test power line or signal line.|
|Pressure balance port||The pressure balance port is used to balance the pressure inside and outside the storehouse. When heating, the internal pressure is prevented from generating too much outward thrust on the door. When cooling, the door is prevented from inward opening. Normally closed, automatically open when the pressure difference is large|
|Heater||using stainless steel barrel heating wire|
|Humidifier||Split humidifier design, convenient for maintenance|
|Water tank||self-made stainless steel water tank with mechanical automatic water inlet function and water shortage alarm function|
|Temperature sensor||imported platinum PT100 temperature sensor with high accuracy|
|Humidity sensor||the electronic humidity sensor "Rodonic" imported from Switzerland|
|Wind turbine||2 motors, stainless steel with long shaft; multi-wing fan blade aluminum alloy wind wheel (SIROCCO FAN), special adjustable 100-page air circulation system|
|Box door||movable door, 6 holes are opened on the door according to the requirements, the door can be removed for activities, 2 sets of hook locks are designed on the left and right sides of the door|
|Air supply system:|
|Special feature of air supply||the air is transported by centrifugal wind wheels, and the wind direction of the air outlet louvers is adjusted to fully ensure the uniformity in the box|
|Circulation motor||use 380V asynchronous motor|
|Wind wheel||Multi-blade centrifugal circulation fan, high and low temperature resistant aluminum alloy blades|
Using multi-stage automatic load capacity adjustment technology, more efficient and more energy-saving
|Compressor||Adopting German "Bizer" semi-hermetic compressor|
|Condenser||barrel condenser (water-cooled condenser)|
1) Danfoss electronic expansion valve. Servo control of refrigerant flow (that is, cooling without heating, heating
Uncooled "static balance" technology)
2) As a new type of control element, the electronic expansion valve has already broken through the throttle mechanism
Concept, it is an important part of the intelligence of the refrigeration system, and it is also the optimization of the refrigeration system.
Important means and guarantees for real realization.
3) Product features:
1. Fully enclosed design, stepper motor drive
2. From very close to fully open in a very short time
3. High accuracy and extremely long life
4. The flow rate changes linearly with a wide cooling capacity range
5. Continuous cooling adjustment, no liquid hammer in the refrigeration circuit
6. The motor is integrated with the valve, with high reliability, and the ceramic valve plate and valve port parts are wear-resistant
1. Realize the active control of the refrigeration system, not the fixed proportional adjustment of the original thermal expansion valve.
control. The output can be adjusted in advance and optimized for different modes and operating conditions.
2. Due to the closed-loop control feedback front end of the electronic expansion valve is the temperature and pressure dual sensor high
Responsive direct control, which can provide the best evaporator liquid supply, so that the refrigeration system
The wider working range achieves excellent cooling capacity output.
3. Energy saving: full-range self-adaptation of the electronic expansion valve + active adaptation to adjust the cooling capacity
Out, making the system more energy efficient.
|Refrigerant||The latest environmentally friendly refrigerants R404A and R23 imported from the US|
|Electromagnetic valve||Danfoss Denmark|
Contact Person: Emily