Payment & Shipping Terms:
|Product Name:||GB/T10586-2006 Fast Temperature And Humid Heat Test Chamber With BTHC And PLC||Electromagnetic Valve:||Danfoss Denmark|
|Temperature Range:||-45℃~+150℃||Humidity Range:||10%～98%RH|
|Condenser:||Barrel Condenser (water-cooled Condenser)||Control Mode:||Temperature And Humidity Control Mode/single Temperature Control Mode|
BTHC Humid Heat Test Chamber,
PLC Humid Heat Test Chamber
GB/T10586-2006 Fast Temperature and Humid Heat Test Chamber With BTHC and PLC
This test chamber provides a simulated environment of high temperature, low temperature, high humidity, and low humidity to detect the materials and strong attenuation of rubber, plastic, and electronic products before and after the test. The machine can also simulate the container environment to detect the discoloration and shrinkage of rubber and plastic under high temperature and high humidity. Test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. It is suitable for the quality inspection of industrial units in electronics, electrical appliances, batteries, universities, research institutes, inspection and quarantine bureaus, paper products, food, vehicles, auto parts, metals, chemicals, building materials and other industries.
Way To Control:
The balanced temperature control system (BTHC) controls the SSR in the P.I.D. mode so that the heating amount of the system is equal to the amount of heat loss, so it can be used stably for a long time.
Equipment standard: designed and manufactured according to national standards GB/T10586-2006 and GB/T10592-1989. *The verification standard is based on GB/T5170.2-2008, 5170.5-2008
Tips: The temperature uniformity of GB/T5170.5-2008. refers to the no-load situation; the humidity uniformity also refers to the no-load conditions!
|Inner box size W×H×D||1000mm*1000mm*1000mm (can be customized)|
|Outer box size W×H×D||1300mm*2300mm*2100mm or negotiate according to the equipment placement site|
|Control stability||Temperature ±0.5℃ Humidity ±2.5%R.H After the temperature reaches the set point, there is no overshoot and jitter of temperature and humidity, and the fluctuation reaches <0.5℃|
|Distribution uniformity||Temperature: ≤±1.5℃ Humidity: ≤±2.5%R.H|
|Temperature rising rate||Heating rate:10.0℃/min Non-linear no-load (the accuracy of temperature rising and falling ±0.6℃/min)|
|Rate of cooling rate Rate of cooling rate||10.0℃/min Non-linear no-load (precision of temperature increase and decrease ±0.6℃/min)|
|Temperature limit||maximum temperature +150℃ minimum temperature -45℃|
|Power source||AC3￠ 5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤±10%)|
|Total power||about 45KW (specifically subject to actual)|
|Noise||≤80 dB measured at 1 meter directly in front of the device|
|Overall structure||The box body is fully welded in the factory, the structure is firm, the installation is fast, the construction period is short, and the equipment can be moved easily in the later stage. There is no need to remove any refrigeration unit or electronic control unit.|
|Inner box material||SUS #304 stainless steel plate (South Korea Pu box)|
|Outer box material||iron plate paint|
|Storage rack||stainless steel SUS304# adjustable spacing storage rail 2 groups, grid storage rack 2 sheet. Each layer bears 20kg. The sample rack can be adjusted up and down as needed.|
|Thermal insulation material||100mm rigid polyurethane foam, fire-resistant and fire-proof, in line with environmental requirements. The interlayer between the stainless steel of the inner chamber and the outer shell is filled with polyurethane, which can simultaneously insulate and strengthen the strength of the inner and outer chambers.|
|Sealing||The door of the test box is sealed with silicon rubber strip, which is resistant to high and low temperature, anti-aging, and has good sealing performance|
|Observation window||There is a large-scale vacuum observation glass with 3 layers of heat and sweat prevention attached to the door. During any test, there is no frost or condensation on the surface.|
|Lighting device||There is a lighting lamp on the window.|
|Test hole||There is one Φ160mm hole on the left and right sides of the body, and two soft plugs. It can be used for external test power line or signal line.|
|Pressure balance port||The pressure balance port is used to balance the pressure inside and outside the storehouse. When heating, the internal pressure is prevented from generating too much outward thrust on the door. When cooling, the door is prevented from inward opening. Normally closed, automatically open when the pressure difference is large|
|Heater||using stainless steel barrel heating wire|
|Humidifier||Split humidifier design, convenient for maintenance|
|Water tank||self-made stainless steel water tank with mechanical automatic water inlet function and water shortage alarm function|
|Temperature sensor||imported platinum PT100 temperature sensor with high accuracy|
|Humidity sensor||the electronic humidity sensor "Rodonic" imported from Switzerland|
|Wind turbine||2 motors, stainless steel with long shaft; multi-wing fan blade aluminum alloy wind wheel (SIROCCO FAN), special adjustable 100-page air circulation system|
|Box door||movable door, 6 holes are opened on the door according to the requirements, the door can be removed for activities, 2 sets of hook locks are designed on the left and right sides of the door|
|Air supply system:|
|Special feature of air supply||the air is transported by centrifugal wind wheels, and the wind direction of the air outlet louvers is adjusted to fully ensure the uniformity in the box|
|Circulation motor||use 380V asynchronous motor|
|Wind wheel||Multi-blade centrifugal circulation fan, high and low temperature resistant aluminum alloy blades|
Using multi-stage automatic load capacity adjustment technology, more efficient and more energy-saving
|Compressor||Adopting German "Bizer" semi-hermetic compressor|
|Condenser||barrel condenser (water-cooled condenser)|
1) Danfoss electronic expansion valve. Servo control of refrigerant flow (that is, cooling without heating, heating
Uncooled "static balance" technology)
2) As a new type of control element, the electronic expansion valve has already broken through the throttle mechanism
Concept, it is an important part of the intelligence of the refrigeration system, and it is also the optimization of the refrigeration system.
Important means and guarantees for real realization.
3) Product features:
1. Fully enclosed design, stepper motor drive
2. From very close to fully open in a very short time
3. High accuracy and extremely long life
4. The flow rate changes linearly with a wide cooling capacity range
5. Continuous cooling adjustment, no liquid hammer in the refrigeration circuit
6. The motor is integrated with the valve, with high reliability, and the ceramic valve plate and valve port parts are wear-resistant
1. Realize the active control of the refrigeration system, not the fixed proportional adjustment of the original thermal expansion valve.
control. The output can be adjusted in advance and optimized for different modes and operating conditions.
2. Due to the closed-loop control feedback front end of the electronic expansion valve is the temperature and pressure dual sensor high
Responsive direct control, which can provide the best evaporator liquid supply, so that the refrigeration system
The wider working range achieves excellent cooling capacity output.
3. Energy saving: full-range self-adaptation of the electronic expansion valve + active adaptation to adjust the cooling capacity
Out, making the system more energy efficient.
|Refrigerant||The latest environmentally friendly refrigerants R404A and R23 imported from the US|
|Electromagnetic valve||Danfoss Denmark|
1. 7-inch (10.2-inch/15-inch) high-definition color touch screen, true color 16 million color resolution 800*480; core controller is PLC, long service life, strong anti-interference ability, high control accuracy, fast data processing speed, and more A variety of signal combination relay (transistor) output, and the expansion is free and flexible
2. The meter comes with RS485/RS232/USB/SD card/Ethernet interface; the meter is connected to the global network, supports mobile phone APP function, and connects to the cloud server through various network channels such as mobile 3G/4G network signals, wireless WIFI, Internet, etc. Can use mobile phones, computers, tablets, a variety of multiple terminal devices for real-time online remote monitoring, control, software upgrades, data import and export, etc.; each meter supports up to 20 administrators, and 8 people can remotely access the meter at the same time; comes with RS485 The interface supports the internationally-available MODBUS communication protocol. The host computer can be configured with multi-level network control; the Ethernet interface of the instrument can be directly connected by a network cable or a wireless local area network can be established through a wireless router, and the computer can be synchronized to monitor the instrument in different places.
3. The instrument comes with RAM 512M+Flash 4G large data storage capacity; USB can be inserted into a U disk to export various experimental recording data in various time periods, which can completely replace the paperless recorder; SD card slot can expand 8G storage capacity and increase storage space
4. There are two kinds of control methods and programming modes: fixed value and program; 2 channels of temperature and humidity input, which are independently controlled; support for free combination programming, the output can be connected in parallel and other difficult controls, and the internal logic programming composite mode can reach 12 groups
5. The interface language can be freely switched between Chinese and English interfaces; with Chinese character input function, edit and input manufacturer data, fault name, test name, etc., the display is intuitive and clear
6. With cooling capacity control, compressor delay function; manual, automatic, scheduled shutdown function; appointment start function
7. 4 internal alarms and 16 external alarm functions can be customized, and the external input DI alarm signal can freely switch between normally closed and normally open signal modes
8. The instrument is equipped with an alarm buzzer, which can be freely set whether to delay the output when the alarm occurs, how long the delay is, whether to stop, whether the buzzer alarms, whether to jump out of the alarm interface, whether to output external alarm points, etc.; hardware failure of the input and output points Time-shift point standby function; water shortage prompt, automatic water replenishment; temperature and humidity running upper and lower limit alarm, over temperature, overload and other automatic alarms
9. Turn on 10S free advertisement display function (USB flash drive imports advertising pictures)
10. The controller can display the current running status in real time, such as: set value, real-time value, running time, number of groups, number of cycles and other main process parameters, statistical data; various control parameters can be set arbitrarily
11. Real-time display of temperature and humidity PV/SP curve; and can query historical curve data of any time period and present it on the touch screen in the form of curve and table
12. 3 level parameter password to prevent irrelevant personnel from changing the parameter function; level 3 password timing lock function
13. The interface device supports micro printer, wireless Ethernet; video function supports IP Camera, you can control the shooting angle; support USB camera, easily know the scene dynamics
Contact Person: Wendy