The Rubber Mill Machine and Rubber Tensile Test Machine of Italy customer have been send yesterday!
Two Roll Mixer Mill is suitable for polymers such as rubber and plastic industry mixing process PVC,
masterbatch and other chemical raw materials. As the raw material and mixed with the agent, and to achieve the desired color and quality. The machine uses special heating the mold, the roller surface temperature uniformity, never delamination, sample thickness adjustable and attached machine safety devices, lightweight and easy to use.
|Model||Rubber Mill Machine|
|Mixed capacity||0.5-1kgs / 2-3kgs / 5-7 kgs|
|Temperature||room temperature ~ 300 ℃|
LED display, buttons to set the input
and display output value
|Temperature control||P.I.D controlled|
|Heater||cylindrical mold is heated|
|Warm-up time||room temperature ~ 150 ℃ about 20min|
|Temperature accuracy||± 3 ℃|
|Roller dimensions||diameter 3.9 "× L13.7"|
|Drum revolutions ratio||Standard revolutions ratio 1:1.25|
|Roller hardness||HRC 50 ~ 60|
Protection device is attached
state of emergency
|Volume||960*550*1150 (W* D* H) mm|
|Power source||AC380V, 15A|
This machine can be test all the material in tensile, compression, bending, shear, peel, tear, two-point extended (need add extensometer) and others for control products quality. Such as textile, rubber, plastics, synthetic leather, tape, adhesive, plastic film, composite materials, electronics, metals and other materials.
|Length of the pillar||1000mm|
|Test the rated speed||0.001~500mm/min|
Contact Person: Ms. Fiona Zhong
Tel: +86 135 3248 7540