Payment & Shipping Terms:
|Motor:||Servo Motor||Max Load::||1KN ( Max )|
|Tester Resolution::||1/50000||Max. Test Stoke::||About 500mm (Can Be Customize)|
|Measuring Accuracy:||± 0.5%||Power Supply::||220V,50HZ, Single Phase|
LCD Display Tensile Testing Machine,
GB/T16491 Tensile Test,
LCD Display Tensile Testing Equipment
Fabric Tear Strength Testing Machine is a simple type machine, simple structure, convenient
operation, It can be tested on the operated table, Using the electronic control systems, load sensor is
rising and falling to test the tension or compression through the motor rotation, transmission
machinery and T-screws. This machine is simple to operate, especially suitable for controlling quality in
production line, This series of machine is mainly applied to test the non-metallic and metallic materials
which the load is less than 1KN.
Fabric Tear Strength Testing Machine can be test all the material in tensile, compression, bending,
shear, peel, tear, two-point extended (need add extensometer) and others for control products quality.
Such as textile, rubber, plastics, synthetic leather, tape, adhesive, plastic film, composite materials, electronics,metals and other materials,
GB/T16491-1996 electronic universal testing machine
Desktop Adhesive Tape Tensile Testing Machine is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.
|Model||Single pillar Fabric universal Tensile Strength Testing Machine|
|Measurement system||Load cell|
|Accuracy load of measurement||the load cell + LCD screen ± 0.5% (full range of 5% -100%)|
|Resolution||1 / 50000|
|Maximum test stoke(excluding fixtures)||
50-300mm / min with stepless speed and 5 fixed-speed
|Data sampling frequency||200times/sec|
|Machine with thermal printers can automatically output the testing results.|
|Can store 10 testing results and auto-calculate its average, auto-grab maximum force and the force at break.|
|Display||LCD display, membrane touch keys, with the following functions.|
|Ratio of Breakpoint||
from 0 ~ 99%, which the user can set according to different materials to stop
the machine, realizing stop machine at any position.
|Safety||The system would shut down if overload or over-trip.|
|Shape||column shell is made of aluminum material.|
|Power system||AC Motor|
|Power||120W(depending on different demand of force using different motor)|
|Power supply||Single Phase, 220V, 60HZ|
Imported photoelectric encoder is used for displacement measurement. The controller adopts an embedded single-chip microcomputer structure with built-in powerful measurement and control software, which integrates measurement, control, calculation, and storage functions. With automatic calculation of stress, elongation (extensometer required), tensile strength, modulus of elasticity, automatic statistical results; automatic recording of the maximum point, breaking point, designated point force or elongation; using a computer for testing Dynamic display of the process and test curve, and data processing. After the test, the graph processing module can be used to enlarge the curve for data analysis and editing, and the report can be printed. The product performance has reached the international advanced level.
Contact Person: Ms. Fiona Zhong
Tel: +86 135 3248 7540