Temperature Alternating Damp Heat Test Chamber Humidity 40*50*40 Cm SUS304

Compressor: fully hermetic compressor imported from France
Refrigerant: Environmental refrigerant R404A
Condenser: fin type with heat dissipation motor
Evaporator: fin type multi section automatic load capacity adjustment
Other accessories: desiccant, refrigerant flow window, repair valve
Expansion system: refrigeration system with capacity control

Detailed Configuration And Software Features:

I. Structure and Material:

1. Inner box material: mirror stainless steel plate (SUS 304 thick 1.0mm);

2. Outer box material: stainless steel plate (1.0mm thick);

3. Insulation layer design: effectively avoid condensation on the top of the box;

4. Insulation layer: insulation layer (rigid Polyurethane foam, 100mm thick);

5. Box door: single piece door, single window, left opening. Flat recessed handle, back knob:SUS #304.Double insulation airtight tight, effectively isolate insulation from heat exchange inside and outside the box;

6. Observation window: three layers of vacuum glass, easy to observe the use of test products, size: 320X250X40mm.

7. Window anti-sweat: electric heating device, to prevent water condensation;

8. Lighting design: high brightness window lighting energy-saving lamps, easy to observe the test products;

9. Test hole: 50mm diameter on the left side of the body with a stainless steel hole cover and a silicone plug (optional multiple or 100mm);

10. Machine pulley: easy to move (to adjust the placement) and strong bolts (fixed position) supporting the use;

11. Box shelves: stainless steel SUS # 304 square perforated steel shelves 2 pieces and 2 sets of tracks (to adjust the spacing);

12. Machine weight: about 200KG