Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Dongguan Zhongli Instrument Technology Co., Ltd.
Home ProductsTextile Testing Machine

Waterproof Fabrics Textile Testing Instruments , Water Permeability Textile Testing Equipment

China Dongguan Zhongli Instrument Technology Co., Ltd. certification
China Dongguan Zhongli Instrument Technology Co., Ltd. certification
Exceptional company. 5 STAR!!! Ship rapidly the item and very WELL packed and protected.Very good machinery and very good communication with company. i more than highly recommend using Dongguan Zhongli Instrument.

—— Remy Attalin

The response from the seller was very fast and helpful. Issuing and confirming the PO/PI was done in a single day. The product was shipped the next day after the transaction is confirmed. Couldn't be more satisfied in terms of service provided by the seller. The machine is well packed in wooden case. Everything arrived in good condition. Come with

—— Warunee Nahauythong

I'm Online Chat Now

Waterproof Fabrics Textile Testing Instruments , Water Permeability Textile Testing Equipment

Waterproof Fabrics Textile Testing Instruments , Water Permeability Textile Testing Equipment
Waterproof Fabrics Textile Testing Instruments , Water Permeability Textile Testing Equipment

Large Image :  Waterproof Fabrics Textile Testing Instruments , Water Permeability Textile Testing Equipment

Product Details:
Place of Origin: China
Brand Name: ZL
Certification: ISO
Model Number: ZL-5016B
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiable
Packaging Details: Packaged within wooden case
Delivery Time: 3-7 days
Payment Terms: T/T, L/C, Western Union
Supply Ability: 100 set per month
Detailed Product Description
Power: 220v 50hz Standard: Iso-811
The Standard Rate: 100 ± 30 MmH2O (increase Rate) The Pressure Area: 100cm2, D = 11.28cm
Rising Speed: 10 ± 3mmH2O (standard Rate) 60 ± 20 MmH2O Warranty: 12 Month
High Light:

textile testing equipment

,

yarn twist tester

 

Simple Fabric Water Permeability Testing machine

Overviewer:

It is widely used in waterproof fabrics, tents, raincoats, down jackets, ski suits, mountaineering suits, diving suits, voyage, PVC, PU, PA and so on. The machine is simple in design, simple in appearance, beautiful in size and small in size. Fabric, snow boots, advertising balloons, gloves, fire clothing, police uniforms, military field uniforms, special uniforms and other fabrics and clothing crosses and straight bit of water pressure test.

 

Technical Parameters:

1. The implementation of standards: in line with gb4744-84, also in line with iso-811

2. Measuring range: waterproof fabrics, tents, down jacket, ski clothing, mountaineering suits, plastic bags, Fang Hanfu, umbrellas, raincoats, fabrics, etc.

3. The technical parameters: the level of sample placed under the sample to withstand the pressure

4. The pressure area: 100cm2, d = 11.28cm

5. Water column height: 0-10000mmH2O (10000mmH2O above to be customized)

6. Rising speed: 10 ± 3mmH2O (standard rate) 60 ± 20 mmH2O

7. The standard rate: 100 ± 30 mmH2O (increase rate)

8. Sensitivity: 1mmH2O, the maximum display value 10000mmH2O

9. The machine size: 280 × 200 × 300mm

10. Machine weight: about 15Kg

 

Features:

Do not take any power and gas, light and convenient, especially suitable for office use;

Manual gripping rubber ball can be aerated test;

Maximum water pressure 10000mmH2O;

Built-in water tank;

 

Use:

1, before the operation, the first installed pressure gauge, joints sealed waterproof tape, do a good job sealing work;

2, before the test, remove the rubber ring, under the pressure plate between the dirt;

3, the manual switch to open the state and the gas side of the party switch off;

4, down the pressure plate into the valve into the amount of clean water;

5, will be detected on the upper and lower pressure plate in the middle;

6, turn the hand wheel so that the pressure plate down until the upper and lower pressure plate completely contact seal so far;

7, hand-held air repeated compression, observe the pressure gauge readings, pressure, while observing the surface of the test object is abnormal, if no, continue to compress the hand-held air pressure until the pressure gauge does not move or meet the required test value, and then turn off the manual switch , Then observe the pressure value changes. If the pressure value does not change, indicating that the hydraulic pressure value is this value; if the pressure value is reduced, the pressure value is stable after the maximum measured water pressure value. When the pressure is hand-held, it is found that the surface of the test object has water seepage and the pressure value of the pressure gauge does not increase, indicating that the pressure of this test is lower than the pressure on the current pressure gauge;

8, the operation is completed, first hit the manual switch and gas Xiang knob switch, release the gas, turn the hand wheel, to rise, remove the test object.

 

Maintenance and troubleshooting:

1. the pressure gauge reading does not rise, the possible reasons:

A. no water;

B. gas connector seal is not good;

C. rubber ring broken;

D. up and down the plate is not good pressure;

2. turn the hand wheel can not be too much force, so as not to arm split;

3. after use to eliminate water, so as not to produce dirt;

4. pay attention to the lubrication of the screw;

 

The warranty requirements:

The following conditions are not covered by the warranty:

1. due to the use of the scope of use or operation caused by equipment damage;

2. due to natural disasters (such as floods, fires, lightning, etc., can not be refuted factors)

3. unauthorized demolition;

4. after installation, moving or transport collision or fall, such as failure.

Contact Details
Dongguan Zhongli Instrument Technology Co., Ltd.

Contact Person: Vilya

Tel: +8613415952714

Send your inquiry directly to us (0 / 3000)