Payment & Shipping Terms:
|Product Name:||Digital Inter Layer Peel Strength Testing Machine||Impact Angle:||Punch Angle 90°|
|Resolution:||0.001lbf/in2||Indication Error:||A Range: ±1J/m2, B Range: ±2J/m2.|
|Sensor:||SH30-5000-2V||Sample Size:||25.4mm × 25.4mm|
|Sample Clamping Force:||0~40kg/cm2 (adjustable)||Interface:||3.2in LCD Display|
paper test equipment,
carton bursting tester
GB/T 26203-2010 TAPPI Digital Inter Layer Peel Strength Testing Machine
The interlaminar bond strength meter is mainly used for the determination of the bond strength in paper and paperboard. It is suitable for single and multi-layer paper and paperboard, including coated paper and paper and paperboard coated with synthetic polymer film for paper mills and The paperboard factory conducted tests on the bond strength in the paper. Not suitable for low basis weight, porous, soft or low density paper and board. Inter layer bonding strength refers to the ability of paper and paperboard to resist inter layer separation. It is a reflection of the internal bonding ability of paper and paperboard. The internal bonding strength can be completely controlled, which is very important for processing multi-layer paper and cardboard. Low values or uneven distribution may cause problems with paper and cardboard when tiling in offset presses that use viscous inks; if the bond strength is too high, it can be difficult to process and increase the cost of the company. . This test has a wide range of applications in the printing and packaging industries in multi-layer cardboard such as boxboard, whiteboard, grayboard, and white cardboard.
It can be used for inter layer bonding test of raw material of yarn tube, inter layer bonding test of white cardboard, inter layer bonding test of kraft paperboard, inter layer bonding test of cardboard paper, and bonding test of aluminum plate.
The main technical parameters:
|Impact angle||Punch angle 90°|
A range: (20-500) J/m2,
B range: (500~1000) J/m2.
|Indication error||A range: ±1J/m2, B range: ±2J/m2.|
|Sample size||25.4mm × 25.4mm|
|Sample clamping force||0~40kg/cm2 (adjustable)|
|Unit||J/m2, lbf/in2 interchange|
|Interface||3.2in LCD display|
|Modular one-piece thermal printer|
|Power supply||AC220V±22V, 50Hz, maximum current 3A, the power supply should be reliably grounded.|
|Appearance size||52cm × 42cm × 70cm|
Contact Person: Vilya