Payment & Shipping Terms:
|Applicable Industry::||Battery Industry||Outer Container::||3mm A3 Steel Plate With Stoving Varnish|
|Inner Container::||SUS#201 Stainless Steel||Inner Door::||Stainless Steel|
|Air Pressure::||1MPa||Box Size (W * D * H)::||500*500*500mm|
phone testing equipment,
mobile phone testing machine
Battery Explosion-proof Testing Machine
Battery explosion-proof box is mainly used for battery over-charge and over-discharge test. The battery is put in the explosion-proof box, connected to external charge and discharge tester. The operator and equipment are under protection.
Specification and Parameter:
1. Size of each test case :500*500*500mm(L*W*H);(or customized)
2. Material quality: outer container:3mm A3 steel plate with stoving varnish , inner container: SUS#201 stainless steel
3.Single door, double layer door, the inner door is made of stainless steel material.The front observation window is notavailable.
4.The door is connected with the box body by a strong hinge,explosion proof door lock
5. The side convection window: open a 200 x 300mm hatch at each side of each box (also can only open the front and back side), in order to abstract heat and convection. With stainless steel mesh, it can prevent explosion and splash effectively.
6.Put a electric board or affix the Teflon tape inside the test box,effective for inflaming retarding and insulation , easy to clean.
7.Open two circular mounting ports at the rear part of each box, which is convenient for the testing and connecting wires to pass through.
8.There is a separate test panel to control the lighting and exhaust of each test room.Smoke detection alarm is available, when there is a fire, the exhaust fan would be turned on automatically;
GB 31241-2014 Safety requirements for lithium ion batteries and battery pack for portable electronic product
GB/T 18287 -2013 General specification for lithium ion batteries for cellular telephones External short circuit requirements
GB/T 8897.6-2008 The sixth part of the primary cell: safety requirements of lithium batteries
YD/T 2366.1-2011 The first part of lithium iron phosphate batteries for communication: integrated batteries
GB/T 21966-2008 Safety requirements for lithium primary batteries and storage battery in transit
MT/T 1051-2007 Lithium ion battery for miner's lamp
YD 1268-2003 Safety requirements and test methods for lithium batteries and chargers of mobile communication handsets
GB/T 19521.11-2005 Safety specification for hazardous features inspection of dangerous cargo of lithium batteries
YDB 032-2009 Backup lithium ion battery for communication
UL 1662:2012 Standard for lithium battery
UL 2056: 2012 Household and commercial batteries
UN38.3(2012) The third part of Recommendations on the transport of dangerous goods - Test and standard manual
IEC62133-2012 Safety requirements for storage batteries with alkaline or non acid electrolytes
Contact Person: Cathy