Payment & Shipping Terms:
|Product Name:||Wire And Cable High-voltage Tester||Input Voltage:||220V/50HZ|
|Output Voltage:||0~10KV/0~15KV/0~25KV||Striking Current:||1,2,5,10,20,100mA|
|Testing Time:||1~99.99 Min||Volume:||600X1500X700cm|
cable testing device,
cable flex tester
IEC Wire and Cable High-voltage Tester , Voltage Automatic Step-up
ZL-1003 wire and cable high-voltage tester used to test the insulation between line core and line core or between the line core and jacket. Operated the applied voltage on the test pieces, slowly rising to the required voltage and current values, check whether the specimen can withstand the voltage. high-pressure part of the tester using epoxy casting dry-type high-voltage transformer and voltage regulator, different the oil-immersed transformers, the size and the weight is different.
Wire and cable, power frequency voltage withstand test, because there is a very large capacitance between the Shih-frequency voltage greater processing of capacitive current and therefore require a larger capacity transformers. Cables larger the longer the cable, capacitance greater need transformer capacity will be.
The maximum test voltage 5kV pressure machine, it can withstand 5A the following capacitive current capacity up to 25kVA.
1) Has a voltage is preset auto step-up feature
2) Voltage Automatic step-up mode
3) To meet the high-voltage wire and cable during the testing process(Step-Up-CV-Step-Down) Withstanding voltage test requirement.
This series of pressure tester in line with electrical products standards and IEC (International Electro-technical Commission) standards.
Suitable for motor, household appliances, instruments, electronic components, insulation material, and wire and cable for high voltage test.
|Testing time||1~99.99 Min|
Contact Person: Vilya